DUB901K
802.11abgn+BT4.0 ,MT7632U ,USB ,2T2R
WiFi
►Chipset:MT7632U
►WiFi-Band:2.4/5 GHz
►Interface:USB2.0
►Data Rate:PHY rate of 300 Mbps
►Antenna:PIFA Antenna x 2
►Dimension:70mm x 30mm x 9.9m (± 0.3mm)
Bluetooth
►BT-Band:2.4 GHz
►Standard:Bluetooth V4.0
►Operation voltage:5.0V +/- 5%
Dual Band
Bointec DUB901K is a WLAN module supporting IEEE 802.11 a/b/g/n standard and Bluetooth 4.0 by the USB 2.0 interface. DUB901K is truly a cost-effective solution for the current wireless market with the powerful performance. Besides, DUB901K possesses the dual band features and 2X2 MIMO technology (2T2R).
Metal Antenna
Moreover, it can achieve the max throughput of 300Mbps based on its comprehensive modulation technique.Bointec DUB901K provides an easy design for various environment such as household appliances, industry, consumer and automobile applications. It contains two metal antenna on the module.
Convenient
It is convenient for all users to use two screw holes on the module in order to assemble on customer’s host board or custom boards. Based on the compact size module and robust setup scheme, DUB901K provides those advantages to enhance the value of our customer’s target product.
Specification |
|
Main Chipset |
MT7632U |
Frequency band |
2.4GHz and 5GHz |
Bandwidth |
20MHz and 40MHz |
Operation Frequency |
USA: 2.400 ~ 2.483GHz, 5.15 ~ 5.35GHz, 5.47 ~ 5.725GHz, 5.725 ~ 5.85GHz. |
Europe: 2.400 ~ 2.483GHz, 5.15 ~ 5.35GHz, 5.47 ~ 5.725GHz |
|
Japan: 2.400 ~ 2.497GHz, 5.15 ~ 5.35GHz, 5.47 ~ 5.725GHz |
|
China: 2.400 ~ 2.483GHz, 5.725 ~5.85GHz |
|
Channels Support |
B Mode: 2.400~2.4836 GHz(1CH~13CH) |
G Mode: 2.400~2.4836 GHz(1CH~13CH) |
|
A Mode: 5,150MHz~5,250MHz (36/40/44/48CH) |
|
5,250MHz~5,350MHz (52/56/60/64CH) |
|
5,470MHz~5,825MHz |
|
(100/104/108/112/116/120/124/128/132/136/140/149/153/157/ |
|
161/165CH) |
|
Transmit Spectrum mask |
Frequency mask is complying with IEEE 802.11spec |
Transmit Center Frequency Tolerance |
The transmitted center frequency tolerance shall be +/-20 ppm maximum |
Modulation Technique |
802.11 Legacy a/b/g |
DSSS (DBPSK, DQPSK, CCK) |
|
OFDM (BPSK, QPSK, 16-QAM, 64-QAM) |
|
DSSS (Direct Sequence Spread Spectrum) with |
|
DBPSK (Differential Binary Phase Shift Keying 1Mbps), |
|
DQPSK (Differential Quaternary Phase Shift Keying 2Mbps), and |
|
CCK (Complementary Code Keying 5.5&11Mbps), and |
|
OFDM (Orthogonal Frequency Division Multiplexing with BPSK for 6,9Mbps、 QPSK for 12,18Mbps、 16QAM for 24,36Mbps、 64QAM for 48, 54Mbps) |
|
802.11n a/g |
|
OFDM (BPSK, QPSK, 16-QAM, 64-QAM) |
|
MCS0~15 data rates. |
|
HT20 and HT40 modes. |
|
Transfer Data Rate |
802.11a: 6, 9, 12, 18, 24, 36, 48, 54Mbps |
802.11b: 1, 2, 5.5, 11Mbps |
|
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps |
|
802.11n: @800GI(400GI) |
|
• 20MHz BW |
|
1 Nss: 65(72.2) Mbps maximal |
|
2 Nss: 130(144.444) Mbps maximal |
|
• 40MHz BW |
|
1 Nss: 135(150) Mbps maximal |
|
2 Nss: 270(300) Mbps maximal |
|
|
|
Hardware |
|
Standard |
IEEE 802.11 a/b/g/n standard and Bluetooth 4.0 |
Antenna |
2 metal antenna on the module board for WiFi (2T2R) |
U.FL connectors for external Bluetooth antenna (Optional) |
|
Host Interface |
USB 2.0 |
PCB Dimension |
(70 +/- 0.2mm) x (30+/- 0.2mm) x (1+/- 0.2mm) with 4 layers |
Power |
5V DC +/- 5%, |
Operation Temperature |
0 ˚C ~ 50 ˚C |
Storage Temperature |
-20 ˚C ~ 80 ˚C |
|
|
Bluetooth |
|
Main Chipset |
MT7632U |
Compliance |
Bluetooth v4.0 |
Frequency Range |
2402~2480 MHz |
Initial carrier frequency tolerance |
+/- 20kHz (typical) |
Modulation technique |
Frequency hopping, 1600 hops/sec |
Channel spacing |
1MHz |
Channels support |
79 channels |
Operation voltage |
5.0V +/- 5% |
Output power (dBm) |
Target power table with 3dB tolerance(BT output Power by FW adjust) |
Operation Temperature |
0 ˚C ~ 50 ˚C |
Certifications |
|
China |
(Pending) |
Taiwan |
(Pending) |