DGF109R
802.11abgn/AC+Bluetooth4.1/5.0 NGFF(M.2 interface),2T2R
Bointec DGF109R IEEE 802.11 a/b/g/n/ac PCIE WIFI with Bluetooth 4.2/5.0 combo M.2 module is a highly integrated single-chip MIMO (Multiple In, Multiple Out) wireless local area network (WLAN) solution to let users enjoy the digital content through the latest wireless technology without using the extra cables and cords. It combines a WLAN MAC, a 2T2R capable WLAN baseband, and RF in s single chip. It enables a high performance, cost effective, low power, compact solution that easily fits onto the PCI Express and USB M.2 module.
Bointec DGF109R/DGF109R-3* IEEE 802.11 a/b/g/n/ac PCIE WIFI with Bluetooth 4.2/5.0* combo M.2 module is a highly integrated single-chip MIMO (Multiple In, Multiple Out) wireless local area network (WLAN) solution to let users enjoy the digital content through the latest wireless technology without using the extra cables and cords. It combines a WLAN MAC, a 2T2R capable WLAN baseband, and RF in s single chip. It enables a high performance, cost effective, low power, compact solution that easily fits onto the PCI Express and USB M.2 module.
Bointec DGF109R/DGF109R-3* baseband implements Multi-user Multiple Input, Multiple Output (MU-MIMO) Orthogonal Frequency Division Multiplexing (OFDM) with two transmit and two receive paths (2T2R). Features include two spatial stream transmissions, short Guard Interval (GI) of 400ns, spatial spreading, and support for variant channel bandwidth.
Moreover, Bointec DGF109R/DGF109R-3 provides one spatial stream space- time block code (STBC), Transmit Beam forming (TXBF) and Low Density Parity Check (LDPC) to extend the range of transmission. At the receiver, extended range and good minimum sensitivity is achieved by having receiver diversity up to 2 antennas. As the recipient, DGF109R also supports explicit sounding packet feedback that helps senders with beam forming capability.
*DGF109R-3 support Bluetooth 5.0, while DGF109A support Bluetooth4.2
Wi-Fi |
|
Standard |
IEEE802.11ac,IEEE802.11a , IEEE802.11b , IEEE 802.11g , IEEE 802.11n |
Bus Interface |
PCI Express |
Data Rate |
802.11b: 1, 2, 5.5, 11Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11n: up to 150Mbps-single 802.11n: up to 300Mbps-2x2 MIMO 802.11ac:up to 192.6Mbps (20MHz channel) 802.11ac:up to 400Mbps (40MHz channel) 802.11ac:up to 866.7Mbps (80MHz channel) |
Media Access Control |
|
Modulation Techniques |
DSSS, OFDM, DBPSK, DQPSK, CCK, 16-QAM, 64-QAM for WLAN |
Network Architecture |
|
Operation Channel |
2.4GHz: USA, NORTH AMERICA, Canada and Taiwan – 1 ~ 11 China, Australia, Most European Countries – 1 ~ 13 Japan – 1 ~ 14(CH14 only for 802.11b) 802.11g: USA, Canada and Taiwan – 1 ~ 11 China, Australia, Most European Countries – 1 ~ 13 5GHz: USA, EUROPE – 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 |
Frequency Range |
2.4 GHz : 2.412 ~ 2.484 GHz 5 GHz: 4.915 ~5.925Ghz |
Security |
WAPI WEP 64-bit and 128-bit encryption with H/W TKIP processing WPA/WPA2 (Wi-Fi Protected Access) AES-CCMP hardware implementation as part of 802.11i security standard |
Bluetooth |
|
Standard |
Bluetooth 2.1+Enhanced Data Rate (EDR) + BT4.2 Bluetooth 5.0 (DGF109R-3) |
Bus Interface |
USB2.0 |
Data Rate |
Bluetooth 2.1+EDR data rates of 1,2, and 3Mbps |
Modulation Scheme |
GFSK (1Mbps), Π/4 DQPSK (2Mbps) and 8DPSK (3Mbps) |
Frequency Range |
2402~2480MHz |
Transmit Output Power |
Class 2 : 0~6 dBm |
Receiver Sensitivity |
GFSK: -88 dBm (Typical) π/4-DQPSK: -89 dBm (Typical) 8-DPSK: -83 dBm (Typical) |
Software |
Bluetooth Suite |
Electronics characteristics |
|
Operating Voltage |
3.3 V |
OS Supported |
Microsoft Windows |
Antenna Type |
I-PEX MHF4 Connector Receptacle (20449) Main : Wi-Fi à TX/RX Aux: Wi-Fi/Bluetooth à TX/RX |
Environmental |
|
Operating Temperature |
|
Storage Temperature |
|
Operating Humidity |
|
Country |
Certification |
EU |
CE |
USA |
FCC |
Canada |
IC |
Japan |
TELEC |
Korea |
KCC |
Taiwan |
NCC |