CSW868A
802.11bgn ,QCA4004 ,SMT ,1T1R
►Chipset:QCA4004
►WiFi-Band:2.4GHz
►Interface:SMT
►Data Rate:PHY rate of 150 Mbps
►Antenna:Built-in printed antenna/
U.FL connector x 1 (Optional)
►Security:WEP, WPA, WPA2
►Dimension:26 mm x 18 mm x 2.5 mm
►single chip system on a chip
Built-in printed Antenna
Bointec CSW868A module with a built-in printed antenna is an intelligent Internet of Everything (IoE) platform which can be powered by Alljoyn with low power wireless connectivity.This completes networking platform enables customers to add full-featured Wi-Fi to a wide variety of products with minimal development effort and cost.
SSL security
It supports a network stack along with SSL security, enabling full-featured internet connectivity and reliable information exchange in a small, low-cost system.The CSW868A module contains a Qualcomm® QCA4004 chipset.
SoC
The QCA4004 is a single chip system on a chip (SoC) 1x1 802.11 b/g/n device optimized for low-power embedded applications with single-stream capability for both Tx and Rx. It has an integrated network processor with a large set of TCP/IP with IPv4/IPv6-based services. The CSW868A provides UART-based host and SPI slave interfaces for connecting to local system controllers.
Specification |
||
Processor |
Qualcomm® QCA4004 |
|
Frequency band |
2.4GHz (2.412 GHz to 2.484 GHz)2.4GHz |
|
Bandwidth |
HT20 and HT40 |
|
Antenna |
• Built-in printed antenna |
|
• External antenna via IPEX connector (Optional) |
||
• 1T1R |
||
Interfaces |
• UART |
• GPIOs |
• USB |
• I2C |
|
• SPI/SDIO |
• I2S |
|
WiFi |
||
Standard |
IEEE 802.11 b/g/n |
|
Internet Protocols |
IPv4/IPv6, TCP/UDP, ARP/NDP, DHCPv4, ICMPv6 |
|
Security Protocols |
WPS, WPA, WPA2, WAPI, WEP, TKIP |
|
Power Consumption |
||
Operating Voltage |
3.3 V ± 10% |
|
Power Consumption |
• Transmit: 250 mA @16dBm |
|
• Receive: 75 mA (typical) |
||
• Power saving mode(DITM=1): 1.09mA |
||
• Standby mode(Sleep): 130uA |
||
Environment |
||
Operating Temperature |
• Industrial: -40°C ~ +85°C |
|
• Commercial: -10°C ~ +65°C |
||
Operating Humidity |
• Operating humidity: 20-70% |
|
Dimension |
||
PCB Size |
26 x 18 x 2.5 mm (height is 3.6mm when a coax cable is plugged into the u.FL connector) |
Datasheet | |||
File Name | Type | Updated | Download |
---|---|---|---|
Bointec_wifi_CSW868A_specification_ENG_v0.2_160302 | 2016-03-03 |
Certifications |
|
USA |
FCC |
Global |
RoHS |
Europe |
CE |