CPE901A
802.11abgn ,AR9382 ,miniPCIe ,2T2R
►Chipset:AR9382
►WiFi-Band:2.4/5 GHz
►Interface:miniPCIe
►Data Rate:up to 300Mbps
►Antenna:U.FL connectors x 2
►OFDM (BPSK, QPSK, 16-QAM, 64-QAM)
►Dimension:26.8mm x 29.85mm x 3.37m (± 0.1mm)
►Support:Support:Win7/Win8/Win10/Linux
Dual-Band
Bointec CPE901A included Atheros AR9382, is a single-chip, dual-band (2.4/5 GHz), 2-stream 11n solution.With PCIe interface.It packs the Atheros Signal-Sustain Technology (SST) technology that enhances rate-over-range performance. Features are enabled by 802.11n including LDPC, TxBF and MLD. Impressively increase in rate-over-range of ~+100% at short range, ~+50% at mid range and ~+25% at long range.
2T2R Mode
Bointec CPE901A consumes less power in every operation mode - active TX, active RX, idle associated and sleep than other Atheros previous chipsets.It keeps the notebook and other computing platforms running much longer on a single battery-charge, while providing TCP throughput of more than 200 Mbps when used in 2x2 mode.
Fast Channel Switch (FCS)
Bointec CPE901A is also optimized for Atheros Direct Connect™ P2P applications. With its Fast Channel Switch (FCS) feature,the channel switching time between the 2.4 GHz and 5 GHz bands is reduced from 10 ms to as little as 1 ms.
Specification |
|
Dimensions |
26.80(+/-0.1mm)* 29.85(+/-0.1mm) * 3.37(+/-0.1mm) |
Main Chip |
Atheros® AR9382 |
Host Interface |
PCI Express® Mini Card Electromechanical Specification Revision 1.2. |
Operation voltage |
3.3V +/- 5% |
Transfer data rate |
· 802.11a: 6, 9, 12, 18, 24, 36, 48, 54Mbps |
· 802.11b: 1, 2, 5.5, 11Mbps |
|
· 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps |
|
· 802.11n: @800GI(400GI) |
|
· 20MHz BW |
|
1 Nss: 65(72.2) Mbps maximal |
|
2 Nss: 130(144.444) Mbps maximal |
|
· 40MHz BW |
|
1 Nss: 135(150) Mbps maximal |
|
2 Nss: 270(300) Mbps maximal |
|
RF connector |
2 x SMT Ultra-miniature coaxial connectors |
TX/RX |
2T2R (2x2 with MCS 0-15) |
Electronics characteristics |
|
Operating Temperature |
-10° ~ 60°C |
Storage Temperature |
-40° ~ 80°C |
Power Consumption |
|
Transmit Power consumption @ 25°C |
(mA) |
|
|
100% TX duty |
|
This can be treated as the peak current consumption during operation. |
|
Radio |
|
Radio TX & Power |
802.11a : |
Setting |
802.11b : |
|
802.11g : |
|
802.11n : |
Transmit spectrum mask |
Frequency mask is marginal to comply with IEEE 802.11spec. |
Radio RX Sensitivity |
Comply with IEEE 802.11 a/b/g/n standard |
TX Center Frequency |
11a : +/- 20ppm, 11b/g : +/- 25ppm |
Tolerance |
(The transmitted center frequency tolerance shall be ± 25 ppm maximum.) |
Power Control Accuracy |
+1.5dB/-1.5dB |
Frequency range |
USA: 2.400 ~ 2.483GHz, 5.15 ~ 5.35GHz, 5.47 ~ 5.725GHz, |
5.725 ~ 5.85GHz |
|
Europe: 2.400 ~ 2.483GHz, 5.15 ~ 5.35GHz, 5.47 ~ 5.725GHz |
|
Japan: 2.400 ~ 2.497GHz, 5.15 ~ 5.35GHz, 5.47 ~ 5.725GHz |
|
China: 2.400 ~ 2.483GHz, 5.725 ~5.85GHz |
|
Modulation technique |
• 802.11 Legacy a/b/g |
DSSS (DBPSK, DQPSK, CCK) |
|
OFDM (BPSK, QPSK, 16-QAM, 64-QAM) |
|
• 802.11 n/a/g |
|
OFDM (BPSK, QPSK, 16-QAM, 64-QAM) |
Datasheet | |||
File Name | Type | Updated | Download |
---|---|---|---|
Bointec_wifi_CPE901A_specification_ENG_v1.3_161206c | 2017-02-09 |
Country |
Certifications |
Canada |
IC |
USA |
FCC |
Japan |
Telec |
Brazil |
ANATEL |
Taiwan |
NCC |
Korea |
KCC |
Europe |
EN 300 328 v1.8.1 |
Europe |
CE |
Other EMI Certifications |
(by contact Bointec Sales) |