DP807K
802.11bgn ,MT7620N ,AP module ,2T2R
►Chipset:MT7620N
►WiFi-Band:2.4GHz
►Interface:UART, GPIOs , PCIe, SDIO, Fast Ethernet, I2C,I2S and USB
►Data Rate:PHY rate up to 300Mbps
►Antenna:U.FL connector x 2
►Security:WEP, WPA, WPA2, 802.1x
►Dimension:40.5 mm x 37 mm x 9.85 mm
►Support PPPoE, Dynamic IP, Static IP Internet Access
AP Module
Bointec DP807K is a WiFi Access Point in module form factor, performing as 2x2 Wi-Fi AP module solutions with compact size.It will be an effective and perfect solutions for household appliances, enterprise or factory equipment and consumer products due to its powerful SoC with the CPU based on MIPS 24 KEc (660 MHz).
2T2R
Hence, there are great extension features that can be implemented.Moreover, Bointec DP807K can provide the max throughput 300Mbps according to 2T2R on 2.4 GHz frequency band. In addition, the interface will be based on UART, GPIOs and Ethernet which are feasible and sophisticated on current most majorities of device.It is definitely easier solutions for all users and engineers to operate and develop the products.
Specification |
|
Processor |
SoC CPU |
Memory |
SDRAM DDR2 64MB |
Flash |
8MB Flash |
Network Management |
|
Local management |
HTTP Web Browser |
Radio |
|
Frequency band |
2.4 GHz |
Standard |
IEEE 802.11 b/g/n standard |
Bandwidth |
HT20 and HT40 |
Antenna |
Reserve 2 IPEX connectors |
Output Power |
EVM and Mask Compliant: |
17dBm at 6Mbps |
|
13dBm at 54Mbps |
|
10dBm at HT40 MCS7 |
|
Sensitivity |
- 90dBm at 6Mbps |
- 72dBm at 54Mbps |
|
- 65dBm at HT40 MCS7 |
|
Interfaces |
|
UART |
TXD;RXD;CTS;RTS |
USB2.0 |
USB Data+;USB Data- |
I2C |
I2C Clock; I2C Data |
I2S |
DTR;DCD;DSR;RIN |
PCIE |
TX+;TX-;RX+;RX-;RST;RFCKO+;RFCKO- |
10/100 LAN Fast Ethernet |
Ethernet 0 and Ethernet 4 |
GPIOs |
Max. Quantity is up to 8 sets |
Power Consumption |
|
Power Consumption |
3W |
Operational Temperature |
|
Ambient temperature |
0~40 Degree C |
Certifications |
|
Europe |
CE |
Globlal |
RhHS |
USA |
FCC |