Home  >  Products  >  WiFi
DFN105A
  • DFN105A
  • DFN105A

DFN105A

802.11abgn/ac+BT4.1 ,QCA9378 ,SMT ,2T2R

    Bointec DFN105A is an dual band 802.11ac/b/g/n Dual-Band WiFi + Bluetooth USB Interface. It is a 2T2R (WiFi/BT co-existence supported) technology, with Enterprise level security supporting: WPA, WPA2. Bointec DFN105A lets you move at the speed of life with faster speeds (up to 867 Mbps, 1~3Mbps EDR for Bluetooth), higher capacity, broader coverage and longer battery life. Dramatically reshapes your connected experience.

     

    Higher throughput wireless networking-- adopting the latest 802.11ac solution, Bointec DFN105A is ideal for next-generation high throughput enterprise networking solution.

     

    Bointec DFN105A incorporated with advanced security encryption, such as WPA, WPA2, and 802.1x for secure wireless connection.

BT Feature:

  • Bluetooth V4.1LE, V4.0 LE, V3.0+HS, Bluetooth V2.1+EDR system, backwards compatible with BT version of 1.1, 1.2 and 2.0
  • Support Class I or clss2 transmitter operation
  • BT transmission speed including 1M, 2M and 3Mbps EDR operations
  • Support for Simple Pairing (SP) and Enhanced Inquiry Response (EIR) function
  • Support for SCATTERNET and PICONET
  • HCI USB interface to work with Windows upper layer stack

 

Wi-Fi Feature:

  • Operate at ISM frequency Band(2.4/ 5 GHz)
  • IEEE Standards Support802.11ac, 802.11a, 802.11b, 802.11g and 802.11n
  • Wi-Fi using USB interface
  • Enterprise level security supporting: WPA, WPA2
  • Support 2 transmission and 2 receiving, transmission rate can up to 867Mbps(Physical Rate) in downstream and upstream

 

Common Feature:

  • Wake on WLAN/Bluetooth function
  • Two RF connector for external antenna
  • Form Factor: SMT solder down Single-side process (stamp module)
  • Support for BT & WLAN Co-existence
  • 14 pins I/O stamp module
  • WLAN / Bluetooth RF interface
  • USB interface (USB 2.0 for WLAN, and USB 1.1 for Bluetooth)
  • 3.3V/1.5A power supply required
  • RoHS Compliance
  • Halogen Free Compliance

Item

Key specifications

Main chipset

QCA QCA9378-7

TX/RX

2T2R

Frequency

range

 

2.400 ~ 2.497GHz,5.15GHz ~ 5.85GHz

 

 

 

 

 

 

Modulation

technique

Ø 802.11 a/b/g

DSSS (DBPSK, DQPSK, CCK)

OFDM (BPSK, QPSK, 16-QAM, 64-QAM)

DSSS (Direct Sequence Spread Spectrum) with

DBPSK (Differential Binary Phase Shift Keying 1Mbps),

DQPSK (Differential Quaternary Phase Shift Keying 2Mbps), and CCK (Complementary Code Keying 5.5&11Mbps), and

OFDM (Orthogonal Frequency Division Multiplexing with BPSK for 6,9Mbps QPSK for

12,18Mbps 16QAM for 24,36Mbps 64QAM for 48,54Mbps)

Ø 802.11n a/g

OFDM (BPSK, QPSK, 16-QAM, 64-QAM)

Ø 802.11 ac

OFDM (BPSK, QPSK, 16-QAM, 64-QAM,256-QAM)

Host

interface

 

ØUSB 2.0

 

Operation

voltage

 

Ø 3.3 V DC +/-5% (including voltage ripple)

 

 

 

 

 

 

Current consumption @3.3V, 25 o

C

 

Mode                                              Average                   Peak

 

2.4 GHz

WLAN Tx                         850 mA

WLAN Rx                         160 mA

5 GHz                           2.4 GHz

1080 mA                                        960 mA

160 mA                                       280 mA

5 GHz

1260 mA

280 mA

Driver disable                                          110 mA                                                                  220 mA

Standby                                              100 mA                                                                 200 mA

WLAN+BT

*WLAN Tx/Rx means continuous Tx/Rx

**Current consumption, measured on PC platform.

 

The maximum power-on inrush current consumption is 1.5A within 10us.

 

 

Item

Key specifications

Main chipset

Ø QCA QCA9378-7

Compliance

Ø Bluetooth v4.1 LE

Frequency

range

 

Ø 2402 ~ 2480 MHz

Initial carrier frequency tolerance

 

Ø +/- 20 kHz (typical)

Modulation

technique

 

Ø Frequency hopping, 1600 hops/sec

Channel

spacing

 

Ø 1 MHz

Channels

support

 

Ø 79 channels for Bluetooth, 40 channels for BLE

Operation

voltage

 

Ø 3.3V +/- 5% (including voltage ripple)

 

 

 

Current consumption @3.3V, 25 o

C

 

Avg (mA)    Max (mA)

 

Idle mode                                             160            310

 

Continuous DH5 TX                               220            370

 

Continuous 2DH5 TX                             220            370

 

Continuous 3DH5 TX                             220            370

 

*Measured on PC platform.

 

 

Output power

(dBm)

 

 

Ø Class 1, BT output power is adjusted by FW .

 

Sensitivity

 

Ø-80 dBm (typ.) for pi/4-DQPSK, 0.1%BER

Operation

temperature

Ø -10o ~ 60o C

Storage

temperature

Ø -35o ~ 70o C , R.H. : 90%

 

RF port

 

Ø 1 RF connector (co-used with WLAN ANT-0) for external antenna

 

PID/VID

 

Ø PID: 3004, VID: 0CF3

Certificate

Status

FCC (USA)

Yes,

FCC-SAR (USA)

 

IC (Canada)

Yes,

BACK