HC828K1
IoT light relay control box one way switch / 802.11bgn(sheetmetal box)
►Accept traditional on/off switch while with remote control command.
►Use Wifi technology to accept wireless remote control lamp on/off
►Maxmum carrying watt to be 1500W
►Minimum current watt could reach 0.5W
►Radio control distance 300m*
►Surge protect up to be 3kV
►Universal power input AC 90~240V
HC828K1 (to connect with a one-way switch)
Bointec HC828K1/2/3 is a smart light controller to be installed between lamps and traditional on/off switch(es), in order to allow lamp to be controlled by WiFi radio.
Using by cutting edge Internet of Thing technologies, Bointec HC828K1/2/3 build-in WiFi radio TX/RX module and microprocessor. With the powerful hardware platform, HC828K1/2/3 could translate BLCP® (Bointec Light Control Protocol) command flow to instruct the connected lamp/bulb to perform on or off. With an Apple® or an Android® smart device by download Bointec netREMOCON® App, it allows you to control the lamp on/off status without walk close to the traditional ON/OFF switch that is on the wall. You can now turn on and off the lamp with a long distance, up to 300 meters away. Accordingly, you could know if the lamp is on or off without walk into the room by look at the lamp status on the smart device.
Imaging how simple 1-2-3 it is, just: 1. install HD828K1/2/3 by a technician to attach the lamp you like to control, 2. install netREMOCON® App in the smart device on your hand, and 3.run Instant Scan® from netREMOCON®. Then, you have finished the setup procedure and start to enjoy the convenience. Moreover, with multiple smart devices, you could have multiple control outlets at a same time. With all of them precisely show the lamp on/off status.
Bointec HC828K1/2/3 series is an industrial grade product. It has surge protection up to 3KV in order your environment is in a outdoor, open space, factory or wherever severe. It also has an internal power supply that could allow you to connect AC power directly instead of to connect with an external power adapter. HC828K series is design for professional industrial so it is allowed to carry 1500W lamp output. With it terminal blocks for mounting the power cables, it could allow you to easily mount HC828K with your current lamp and traditional switches.
Feature |
Specification |
General |
|
Operating Voltage |
AC 90-240V |
Power consumption |
Less than 1.0W |
Maximum carrying Wattage |
1500W |
Minimum carrying Wattage |
0.5W |
Surge protection |
3KV |
MTBF |
100,000 times trigger |
WiFi |
|
Radio Frequency band |
2.4GHz (2.412 GHz to 2.484 GHz)2.4GHz |
Standard |
IEEE 802.11 b/g/n |
Bandwidth |
HT20 and HT40 |
Wifi 802.11gn |
1T1R |
Security Protocols |
WPS, WPA, WPA2, WAPI, WEP, TKIP |
Antenna |
Dipole , |
Environment |
|
Operating Temperature |
-20°C ~ +80°C |
Operating Humidity |
20 ~ 80% |
Dimension |
|
Product |
95 x 60 x 25 mm (exclude antenna) |
Certificate |
|
China |
CMIIT(TBD) |
Canada |
IC |
USA |
FCC |
Japan |
Telec |
Brazil |
ANATEL(TBD) |
Taiwan |
NCC |
Europe |
EN 300 328 v1.9.1 |
Europe |
CE |
Other EMI Certifications |
(by contact Bointec Sales) |
Certifications |
|
Europe |
RoHS |