CSW868A
802.11bgn ,QCA4004 ,SMT ,1T1R
►Chipset:QCA4004
►WiFi-Band:2.4GHz
►Interface:SMT
►Data Rate:PHY rate of 150 Mbps 
►Antenna:Built-in printed antenna/
                 U.FL connector x 1 (Optional)
►Security:WEP, WPA, WPA2
►Dimension:26 mm x 18 mm x 2.5 mm
►single chip system on a chip 
Built-in printed Antenna
Bointec CSW868A module with a built-in printed antenna is an intelligent Internet of Everything (IoE) platform which can be powered by Alljoyn with low power wireless connectivity.This completes networking platform enables customers to add full-featured Wi-Fi to a wide variety of products with minimal development effort and cost.
SSL security
It supports a network stack along with SSL security, enabling full-featured internet connectivity and reliable information exchange in a small, low-cost system.The CSW868A module contains a Qualcomm® QCA4004 chipset. 
SoC
The QCA4004 is a single chip system on a chip (SoC) 1x1 802.11 b/g/n device optimized for low-power embedded applications with single-stream capability for both Tx and Rx. It has an integrated network processor with a large set of TCP/IP with IPv4/IPv6-based services. The CSW868A provides UART-based host and SPI slave interfaces for connecting to local system controllers.
| 
			 Specification  | 
		||
| 
			 Processor  | 
			
			 Qualcomm® QCA4004  | 
		|
| 
			 Frequency band  | 
			
			 2.4GHz (2.412 GHz to 2.484 GHz)2.4GHz  | 
		|
| 
			 Bandwidth  | 
			
			 HT20 and HT40  | 
		|
| 
			 Antenna  | 
			
			 • Built-in printed antenna  | 
		|
| 
			 • External antenna via IPEX connector (Optional)  | 
		||
| 
			 • 1T1R  | 
		||
| 
			 Interfaces  | 
			
			 • UART  | 
			
			 • GPIOs  | 
		
| 
			 • USB  | 
			
			 • I2C  | 
		|
| 
			 • SPI/SDIO  | 
			
			 • I2S  | 
		|
| 
			 WiFi  | 
		||
| 
			 Standard  | 
			
			 IEEE 802.11 b/g/n  | 
		|
| 
			 Internet Protocols  | 
			
			 IPv4/IPv6, TCP/UDP, ARP/NDP, DHCPv4, ICMPv6  | 
		|
| 
			 Security Protocols  | 
			
			 WPS, WPA, WPA2, WAPI, WEP, TKIP  | 
		|
| 
			 Power Consumption  | 
		||
| 
			 Operating Voltage  | 
			
			 3.3 V ± 10%  | 
		|
| 
			 Power Consumption  | 
			
			 • Transmit: 250 mA @16dBm  | 
		|
| 
			 • Receive: 75 mA (typical)  | 
		||
| 
			 • Power saving mode(DITM=1): 1.09mA  | 
		||
| 
			 • Standby mode(Sleep): 130uA  | 
		||
| 
			 Environment  | 
		||
| 
			 Operating Temperature  | 
			
			 • Industrial: -40°C ~ +85°C  | 
		|
| 
			 • Commercial: -10°C ~ +65°C  | 
		||
| 
			 Operating Humidity  | 
			
			 • Operating humidity: 20-70%  | 
		|
| 
			 Dimension  | 
		||
| 
			 PCB Size  | 
			
			 26 x 18 x 2.5 mm (height is 3.6mm when a coax cable is plugged into the u.FL connector)  | 
		|
| Datasheet | |||
| File Name | Type | Updated | Download | 
|---|---|---|---|
| Bointec_wifi_CSW868A_specification_ENG_v0.2_160302 | 2016-03-03 | ||
| 
			 Certifications  | 
		|
| 
			 USA  | 
			
			 FCC  | 
		
| 
			 Global  | 
			
			 RoHS  | 
		
| 
			 Europe  | 
			
			 CE  | 
		
