CUB805K
802.11bgn ,RT5370 ,USB ,1T1R
►Chipset:RT5370
►WiFi-Band:2.4GHz
►Interface:USB
►Data Rate:PHY rate of 150 Mbps
►Antenna:U.FL connectors x 1
►Security:WEP, WPA, WPA2
►Dimension:28.0 mm x 14.2 mm x 2.2 mm (± 0.2mm)
►Support:Support:WinXP/WinVista/Linux
WLAN module
Bointec CUB805K is a WLAN module supporting IEEE 802.11 b/g/n standards with 6-pin connector supporting USB 2.0 /1.1 interface.This is a small form factor and low cost compact WLAN module designed for the wireless connectivity of products with embedded system.
Soldered on a main PCB
This module operates in 2.4GHz ISM frequency band, it applies a highly integrated MAC/BBP and RF single chip RT5370 with 150Mbps PHY rate supporting.This module can be built-in other embedded applications such as IP Camera, IP set top box, GPS, Internet radio apparatus,it can be directly soldered on a main PCB.
|
Specification |
|
|
Standards |
IEEE 802.11b/g/n (1T1R mode) |
|
Bus Interface |
USB 2.0/11 |
|
USB Interface |
Max: 7 pins, 2.0 mm pitch pin header. Or Max: 7 pins semi-hole. |
|
Operating Frequency |
2.412GHz~2.835GHz, the CH14 can be made upon request. |
|
Protocols |
802.11b: CCK, QPSK, BPSK |
|
802.11 g/n:OFDM |
|
|
Antenna |
External antenna Via I-PEX MHF receptacle or Built-in On Board |
|
Security |
WPA/WP2?WPAI, 64/128/152-bit WEP, WPS |
|
Transmit Output Power |
11b:17±1.0dBm @ 11Mbps; |
|
802.11n: (HT20), 12 ± 1dBm, |
|
|
Receive Sensitivity |
11b: -84dBm @ 11Mbps ; 11g: -72dBm @ 54Mbps |
|
802.11n: (HT20), -68dBm @ MSC7, (HT40), -67dBm @ MSC7 |
|
|
Operating Voltage |
5.0V or 3.3VDV ± 5% |
|
Operating Current (OFDM, 54Mbps) |
5.0 power input, <150mA; 3.3V power input<250mA |
|
Operating Temperature |
-15ºC to +70ºC |
|
Storage Temperature |
-30ºC to +85ºC |
|
Operating Humidity |
20% to 80% |
|
Storage Humidity |
20% to 80% |
|
Certifications |
|
|
Europe |
(Pending)CE |
|
Global |
RoHS |
|
USA |
(Pending)FCC |
