DFN105A
802.11abgn/ac+BT4.1 ,QCA9378 ,SMT ,2T2R
Bointec DFN105A is an dual band 802.11ac/b/g/n Dual-Band WiFi + Bluetooth USB Interface. It is a 2T2R (WiFi/BT co-existence supported) technology, with Enterprise level security supporting: WPA, WPA2. Bointec DFN105A lets you move at the speed of life with faster speeds (up to 867 Mbps, 1~3Mbps EDR for Bluetooth), higher capacity, broader coverage and longer battery life. Dramatically reshapes your connected experience.
Higher throughput wireless networking-- adopting the latest 802.11ac solution, Bointec DFN105A is ideal for next-generation high throughput enterprise networking solution.
Bointec DFN105A incorporated with advanced security encryption, such as WPA, WPA2, and 802.1x for secure wireless connection.
BT Feature:
- Bluetooth V4.1LE, V4.0 LE, V3.0+HS, Bluetooth V2.1+EDR system, backwards compatible with BT version of 1.1, 1.2 and 2.0
 - Support Class I or clss2 transmitter operation
 - BT transmission speed including 1M, 2M and 3Mbps EDR operations
 - Support for Simple Pairing (SP) and Enhanced Inquiry Response (EIR) function
 - Support for SCATTERNET and PICONET
 - HCI USB interface to work with Windows upper layer stack
 
Wi-Fi Feature:
- Operate at ISM frequency Band(2.4/ 5 GHz)
 - IEEE Standards Support802.11ac, 802.11a, 802.11b, 802.11g and 802.11n
 - Wi-Fi using USB interface
 - Enterprise level security supporting: WPA, WPA2
 - Support 2 transmission and 2 receiving, transmission rate can up to 867Mbps(Physical Rate) in downstream and upstream
 
Common Feature:
- Wake on WLAN/Bluetooth function
 - Two RF connector for external antenna
 - Form Factor: SMT solder down Single-side process (stamp module)
 - Support for BT & WLAN Co-existence
 - 14 pins I/O stamp module
 - WLAN / Bluetooth RF interface
 - USB interface (USB 2.0 for WLAN, and USB 1.1 for Bluetooth)
 - 3.3V/1.5A power supply required
 - RoHS Compliance
 - Halogen Free Compliance
 
| 
			 Item  | 
			
			 Key specifications  | 
		
| 
			 Main chipset  | 
			
			 QCA QCA9378-7  | 
		
| 
			 TX/RX  | 
			
			 2T2R  | 
		
| 
			 Frequency range  | 
			
			 
 2.400 ~ 2.497GHz,5.15GHz ~ 5.85GHz  | 
		
| 
			 
 
 
 
 
 
 Modulation technique  | 
			
			 Ø 802.11 a/b/g DSSS (DBPSK, DQPSK, CCK) OFDM (BPSK, QPSK, 16-QAM, 64-QAM) DSSS (Direct Sequence Spread Spectrum) with DBPSK (Differential Binary Phase Shift Keying 1Mbps), DQPSK (Differential Quaternary Phase Shift Keying 2Mbps), and CCK (Complementary Code Keying 5.5&11Mbps), and OFDM (Orthogonal Frequency Division Multiplexing with BPSK for 6,9Mbps、 QPSK for 12,18Mbps、 16QAM for 24,36Mbps、 64QAM for 48,54Mbps) Ø 802.11n a/g OFDM (BPSK, QPSK, 16-QAM, 64-QAM) Ø 802.11 ac OFDM (BPSK, QPSK, 16-QAM, 64-QAM,256-QAM)  | 
		
| 
			 Host interface  | 
			
			 
 ØUSB 2.0  | 
		
| 
			 Operation voltage  | 
			
			 
 Ø 3.3 V DC +/-5% (including voltage ripple)  | 
			
			 
  | 
		|||
| 
			 
 
 
 
 
 Current consumption @3.3V, 25 o C  | 
			
			 
 Mode Average Peak  | 
			
			 
  | 
		|||
| 
			 2.4 GHz WLAN Tx 850 mA WLAN Rx 160 mA  | 
			
			 5 GHz 2.4 GHz 1080 mA 960 mA 160 mA 280 mA  | 
			
			 5 GHz 1260 mA 280 mA  | 
		|||
| 
			 Driver disable 110 mA 220 mA Standby 100 mA 200 mA WLAN+BT *WLAN Tx/Rx means continuous Tx/Rx **Current consumption, measured on PC platform. 
 The maximum power-on inrush current consumption is 1.5A within 10us.  | 
			
			 
  | 
		||||
| 
			 Item  | 
			
			 Key specifications  | 
		
| 
			 Main chipset  | 
			
			 Ø QCA QCA9378-7  | 
		
| 
			 Compliance  | 
			
			 Ø Bluetooth v4.1 LE  | 
		
| 
			 Frequency range  | 
			
			 
 Ø 2402 ~ 2480 MHz  | 
		
| 
			 Initial carrier frequency tolerance  | 
			
			 
 Ø +/- 20 kHz (typical)  | 
		
| 
			 Modulation technique  | 
			
			 
 Ø Frequency hopping, 1600 hops/sec  | 
		
| 
			 Channel spacing  | 
			
			 
 Ø 1 MHz  | 
		
| 
			 Channels support  | 
			
			 
 Ø 79 channels for Bluetooth, 40 channels for BLE  | 
		
| 
			 Operation voltage  | 
			
			 
 Ø 3.3V +/- 5% (including voltage ripple)  | 
		
| 
			 
 
 
 Current consumption @3.3V, 25 o C  | 
			
			 
 Avg (mA) Max (mA) 
 Idle mode 160 310 
 Continuous DH5 TX 220 370 
 Continuous 2DH5 TX 220 370 
 Continuous 3DH5 TX 220 370 
 *Measured on PC platform.  | 
		
| 
			 
 Output power (dBm)  | 
			
			 
 
 Ø Class 1, BT output power is adjusted by FW .  | 
		
| 
			 
 Sensitivity  | 
			
			 
 Ø-80 dBm (typ.) for pi/4-DQPSK, 0.1%BER  | 
		
| 
			 Operation temperature  | 
			
			 Ø -10o ~ 60o C  | 
		
| 
			 Storage temperature  | 
			
			 Ø -35o ~ 70o C , R.H. : 90%  | 
		
| 
			 
 RF port  | 
			
			 
 Ø 1 RF connector (co-used with WLAN ANT-0) for external antenna  | 
		
| 
			 
 PID/VID  | 
			
			 
 Ø PID: 3004, VID: 0CF3  | 
		
| 
			 Certificate  | 
			
			 Status  | 
		
| 
			 FCC (USA)  | 
			
			 Yes,  | 
		
| 
			 FCC-SAR (USA)  | 
			
			 
  | 
		
| 
			 IC (Canada)  | 
			
			 Yes,  | 
		
