 
            DFN105A
802.11abgn/ac+BT4.1 ,QCA9378 ,SMT ,2T2R
Bointec DFN105A is an dual band 802.11ac/b/g/n Dual-Band WiFi + Bluetooth USB Interface. It is a 2T2R (WiFi/BT co-existence supported) technology, with Enterprise level security supporting: WPA, WPA2. Bointec DFN105A lets you move at the speed of life with faster speeds (up to 867 Mbps, 1~3Mbps EDR for Bluetooth), higher capacity, broader coverage and longer battery life. Dramatically reshapes your connected experience.
Higher throughput wireless networking-- adopting the latest 802.11ac solution, Bointec DFN105A is ideal for next-generation high throughput enterprise networking solution.
Bointec DFN105A incorporated with advanced security encryption, such as WPA, WPA2, and 802.1x for secure wireless connection.
BT Feature:
- Bluetooth V4.1LE, V4.0 LE, V3.0+HS, Bluetooth V2.1+EDR system, backwards compatible with BT version of 1.1, 1.2 and 2.0
- Support Class I or clss2 transmitter operation
- BT transmission speed including 1M, 2M and 3Mbps EDR operations
- Support for Simple Pairing (SP) and Enhanced Inquiry Response (EIR) function
- Support for SCATTERNET and PICONET
- HCI USB interface to work with Windows upper layer stack
Wi-Fi Feature:
- Operate at ISM frequency Band(2.4/ 5 GHz)
- IEEE Standards Support802.11ac, 802.11a, 802.11b, 802.11g and 802.11n
- Wi-Fi using USB interface
- Enterprise level security supporting: WPA, WPA2
- Support 2 transmission and 2 receiving, transmission rate can up to 867Mbps(Physical Rate) in downstream and upstream
Common Feature:
- Wake on WLAN/Bluetooth function
- Two RF connector for external antenna
- Form Factor: SMT solder down Single-side process (stamp module)
- Support for BT & WLAN Co-existence
- 14 pins I/O stamp module
- WLAN / Bluetooth RF interface
- USB interface (USB 2.0 for WLAN, and USB 1.1 for Bluetooth)
- 3.3V/1.5A power supply required
- RoHS Compliance
- Halogen Free Compliance
| Item | Key specifications | 
| Main chipset | QCA QCA9378-7 | 
| TX/RX | 2T2R | 
| Frequency range | 
 2.400 ~ 2.497GHz,5.15GHz ~ 5.85GHz | 
| 
 
 
 
 
 
 Modulation technique | Ø 802.11 a/b/g DSSS (DBPSK, DQPSK, CCK) OFDM (BPSK, QPSK, 16-QAM, 64-QAM) DSSS (Direct Sequence Spread Spectrum) with DBPSK (Differential Binary Phase Shift Keying 1Mbps), DQPSK (Differential Quaternary Phase Shift Keying 2Mbps), and CCK (Complementary Code Keying 5.5&11Mbps), and OFDM (Orthogonal Frequency Division Multiplexing with BPSK for 6,9Mbps、 QPSK for 12,18Mbps、 16QAM for 24,36Mbps、 64QAM for 48,54Mbps) Ø 802.11n a/g OFDM (BPSK, QPSK, 16-QAM, 64-QAM) Ø 802.11 ac OFDM (BPSK, QPSK, 16-QAM, 64-QAM,256-QAM) | 
| Host interface | 
 ØUSB 2.0 | 
| Operation voltage | 
 Ø 3.3 V DC +/-5% (including voltage ripple) | 
 | |||
| 
 
 
 
 
 Current consumption @3.3V, 25 o C | 
 Mode Average Peak | 
 | |||
| 2.4 GHz WLAN Tx 850 mA WLAN Rx 160 mA | 5 GHz 2.4 GHz 1080 mA 960 mA 160 mA 280 mA | 5 GHz 1260 mA 280 mA | |||
| Driver disable 110 mA 220 mA Standby 100 mA 200 mA WLAN+BT *WLAN Tx/Rx means continuous Tx/Rx **Current consumption, measured on PC platform. 
 The maximum power-on inrush current consumption is 1.5A within 10us. | 
 | ||||
| Item | Key specifications | 
| Main chipset | Ø QCA QCA9378-7 | 
| Compliance | Ø Bluetooth v4.1 LE | 
| Frequency range | 
 Ø 2402 ~ 2480 MHz | 
| Initial carrier frequency tolerance | 
 Ø +/- 20 kHz (typical) | 
| Modulation technique | 
 Ø Frequency hopping, 1600 hops/sec | 
| Channel spacing | 
 Ø 1 MHz | 
| Channels support | 
 Ø 79 channels for Bluetooth, 40 channels for BLE | 
| Operation voltage | 
 Ø 3.3V +/- 5% (including voltage ripple) | 
| 
 
 
 Current consumption @3.3V, 25 o C | 
 Avg (mA) Max (mA) 
 Idle mode 160 310 
 Continuous DH5 TX 220 370 
 Continuous 2DH5 TX 220 370 
 Continuous 3DH5 TX 220 370 
 *Measured on PC platform. | 
| 
 Output power (dBm) | 
 
 Ø Class 1, BT output power is adjusted by FW . | 
| 
 Sensitivity | 
 Ø-80 dBm (typ.) for pi/4-DQPSK, 0.1%BER | 
| Operation temperature | Ø -10o ~ 60o C | 
| Storage temperature | Ø -35o ~ 70o C , R.H. : 90% | 
| 
 RF port | 
 Ø 1 RF connector (co-used with WLAN ANT-0) for external antenna | 
| 
 PID/VID | 
 Ø PID: 3004, VID: 0CF3 | 
| Certificate | Status | 
| FCC (USA) | Yes, | 
| FCC-SAR (USA) | 
 | 
| IC (Canada) | Yes, | 

 
 